Step 2. Readiness check
The readiness check makes sure your server and environment are set up correctly for upgrading components. In the event of errors, you can consult troubleshooting suggestions in this guide.
Start the readiness check
To start, click either Start Readiness Check or Next on the System Upgrade page. A sample follows.
After the readiness check completes, see one of the following:
Readiness check success
The following figure shows an example of a successful readiness check. If all tests passed, click Nextand continue with the next step.
Readiness check failure
Messages similar to the following display if any readiness check fails.
In the event of failure, see one of the following sections:
